Designed for a simpler backyard pool setup
Perfect Pool is built for families who want a premium above-ground pool experience without excavation, steel-wall assembly, or a contractor-heavy installation timeline.
Prepare the location
Choose a flat, stable area that is clear of sharp objects, rocks, roots, and debris. Leave room around the pool for walking, ladder access, filtration equipment, cover handling, and routine maintenance.
Position and inflate
Unpack the pool, center it in the setup area, and inflate according to the included guidance. Proper inflation helps the drop-stitch wall create its firm, structured feel.
Connect filtration
The hose kit connects the two lower suction ports to the pump and filter system, then returns filtered water through the upper return port and directional eyeball jet.
The 90-minute setup advantage
Perfect Pool is designed for a faster, more approachable setup experience once your site is prepared. Actual timing can vary based on yard conditions, unpacking, filling, hose connections, and equipment familiarity.
How the hose system works
The upper pool wall port is the return port. The two lower ports are suction ports. Water is pulled from the lower suction ports into the pump and filter system, then filtered water returns through the upper return port.
Setup reminders
- Keep the pump off and unplugged until all hoses are connected.
- Fill the pool above all suction and return ports before startup.
- Do not move the multiport valve while the pump is running.
- Check every hose, clamp, fitting, and connection before use.
- Watch for leaks during the first few minutes after startup.
Pre-start checklist
- Pool is on a clean, level, stable surface
- Pool is properly inflated before filling
- Upper return port is connected to the filter return line
- Both lower suction ports are connected to the suction tee
- Pump discharge is connected to the filter or multiport valve
- All hose clamps are secure and hoses are not kinked
- Multiport valve is set to FILTER before startup
- Water level is above all suction and return ports
Does Perfect Pool require excavation?
No. Perfect Pool is designed as an above-ground pool option and does not require the same excavation or construction process as an inground pool.
Can setup really take around 90 minutes?
The pool is designed for a fast setup path once the site is level, clear, and ready. Actual timing can vary based on preparation, hose connections, filling, and equipment familiarity.
What matters most before setup?
The most important step is preparing a flat, stable, clean surface that can support the filled pool. A proper setup area helps protect the pool and improves the swimming experience.
Where do I find the hose kit instructions?
The hose kit assembly guide is available on the Documents page and explains the suction ports, return port, pump, filter, hose clamps, and startup checklist.